CGAL 6.0.1 - Weights
Loading...
Searching...
No Matches

#include<CGAL/Weights/inverse_distance_weights.h>

This weight is computed as \(w = \frac{1}{d}\) with notations shown in the figure below.

Here, the distance is computed between the points p and q.

Alternative formulations are explained in Implementation.

Figure 109.1 Notation used for the inverse distance weight.


Alternative Formulations
This weight is a special case of the Shepard Weight.

Template Parameters
GeomTraitsa model of AnalyticWeightTraits_2 for 2D points; a model of AnalyticWeightTraits_3 for 3D points
Precondition
d != 0

Functions

template<typename GeomTraits >
GeomTraits::FT CGAL::Weights::inverse_distance_weight (const typename GeomTraits::Point_2 &, const typename GeomTraits::Point_2 &p, const typename GeomTraits::Point_2 &, const typename GeomTraits::Point_2 &q, const GeomTraits &traits)
 computes the inverse distance weight in 2D using the points p and q.
 
template<typename Kernel >
Kernel::FT CGAL::Weights::inverse_distance_weight (const CGAL::Point_2< Kernel > &, const CGAL::Point_2< Kernel > &p, const CGAL::Point_2< Kernel > &, const CGAL::Point_2< Kernel > &q)
 computes the inverse distance weight in 2D using the points p and q.
 
template<typename GeomTraits >
GeomTraits::FT CGAL::Weights::inverse_distance_weight (const typename GeomTraits::Point_2 &p, const typename GeomTraits::Point_2 &q, const GeomTraits &traits)
 computes the inverse distance weight in 2D using the points p and q.
 
template<typename Kernel >
Kernel::FT CGAL::Weights::inverse_distance_weight (const CGAL::Point_2< Kernel > &p, const CGAL::Point_2< Kernel > &q)
 computes the inverse distance weight in 2D using the points p and q.
 
template<typename GeomTraits >
GeomTraits::FT CGAL::Weights::inverse_distance_weight (const typename GeomTraits::Point_3 &, const typename GeomTraits::Point_3 &p, const typename GeomTraits::Point_3 &, const typename GeomTraits::Point_3 &q, const GeomTraits &traits)
 computes the inverse distance weight in 3D using the points p and q.
 
template<typename Kernel >
Kernel::FT CGAL::Weights::inverse_distance_weight (const CGAL::Point_3< Kernel > &, const CGAL::Point_3< Kernel > &p, const CGAL::Point_3< Kernel > &, const CGAL::Point_3< Kernel > &q)
 computes the inverse distance weight in 3D using the points p and q.
 
template<typename GeomTraits >
GeomTraits::FT CGAL::Weights::inverse_distance_weight (const typename GeomTraits::Point_3 &p, const typename GeomTraits::Point_3 &q, const GeomTraits &traits)
 computes the inverse distance weight in 3D using the points p and q.
 
template<typename Kernel >
Kernel::FT CGAL::Weights::inverse_distance_weight (const CGAL::Point_3< Kernel > &p, const CGAL::Point_3< Kernel > &q)
 computes the inverse distance weight in 3D using the points p and q.
 

Function Documentation

◆ inverse_distance_weight() [1/8]

template<typename Kernel >
Kernel::FT CGAL::Weights::inverse_distance_weight ( const CGAL::Point_2< Kernel > &  ,
const CGAL::Point_2< Kernel > &  p,
const CGAL::Point_2< Kernel > &  ,
const CGAL::Point_2< Kernel > &  q 
)

#include <CGAL/Weights/inverse_distance_weights.h>

computes the inverse distance weight in 2D using the points p and q.

Template Parameters
Kernela model of Kernel

◆ inverse_distance_weight() [2/8]

template<typename Kernel >
Kernel::FT CGAL::Weights::inverse_distance_weight ( const CGAL::Point_2< Kernel > &  p,
const CGAL::Point_2< Kernel > &  q 
)

#include <CGAL/Weights/inverse_distance_weights.h>

computes the inverse distance weight in 2D using the points p and q.

Template Parameters
Kernela model of Kernel

◆ inverse_distance_weight() [3/8]

template<typename Kernel >
Kernel::FT CGAL::Weights::inverse_distance_weight ( const CGAL::Point_3< Kernel > &  ,
const CGAL::Point_3< Kernel > &  p,
const CGAL::Point_3< Kernel > &  ,
const CGAL::Point_3< Kernel > &  q 
)

#include <CGAL/Weights/inverse_distance_weights.h>

computes the inverse distance weight in 3D using the points p and q.

Template Parameters
Kernela model of Kernel

◆ inverse_distance_weight() [4/8]

template<typename Kernel >
Kernel::FT CGAL::Weights::inverse_distance_weight ( const CGAL::Point_3< Kernel > &  p,
const CGAL::Point_3< Kernel > &  q 
)

#include <CGAL/Weights/inverse_distance_weights.h>

computes the inverse distance weight in 3D using the points p and q.

Template Parameters
Kernela model of Kernel

◆ inverse_distance_weight() [5/8]

template<typename GeomTraits >
GeomTraits::FT CGAL::Weights::inverse_distance_weight ( const typename GeomTraits::Point_2 &  ,
const typename GeomTraits::Point_2 &  p,
const typename GeomTraits::Point_2 &  ,
const typename GeomTraits::Point_2 &  q,
const GeomTraits &  traits 
)

#include <CGAL/Weights/inverse_distance_weights.h>

computes the inverse distance weight in 2D using the points p and q.

Template Parameters
GeomTraitsa model of AnalyticWeightTraits_2
Examples
Weights/custom_traits.cpp.

◆ inverse_distance_weight() [6/8]

template<typename GeomTraits >
GeomTraits::FT CGAL::Weights::inverse_distance_weight ( const typename GeomTraits::Point_2 &  p,
const typename GeomTraits::Point_2 &  q,
const GeomTraits &  traits 
)

#include <CGAL/Weights/inverse_distance_weights.h>

computes the inverse distance weight in 2D using the points p and q.

Template Parameters
GeomTraitsa model of AnalyticWeightTraits_2

◆ inverse_distance_weight() [7/8]

template<typename GeomTraits >
GeomTraits::FT CGAL::Weights::inverse_distance_weight ( const typename GeomTraits::Point_3 &  ,
const typename GeomTraits::Point_3 &  p,
const typename GeomTraits::Point_3 &  ,
const typename GeomTraits::Point_3 &  q,
const GeomTraits &  traits 
)

#include <CGAL/Weights/inverse_distance_weights.h>

computes the inverse distance weight in 3D using the points p and q.

Template Parameters
GeomTraitsa model of AnalyticWeightTraits_3

◆ inverse_distance_weight() [8/8]

template<typename GeomTraits >
GeomTraits::FT CGAL::Weights::inverse_distance_weight ( const typename GeomTraits::Point_3 &  p,
const typename GeomTraits::Point_3 &  q,
const GeomTraits &  traits 
)

#include <CGAL/Weights/inverse_distance_weights.h>

computes the inverse distance weight in 3D using the points p and q.

Template Parameters
GeomTraitsa model of AnalyticWeightTraits_3